Door Handle Replacement
It's worth replacing door handles if you aren't happy with the way they appear, or if they're difficult to use. With a bit of patience, you can put in the new handle in no time.
Most modern door handles have cover plates that conceal the screws to create a stylish appearance. However, you'll have to attach them separately if the new handle doesn't already have them.
Remove the handle that was previously used
The door handle isn't only a decorative addition to your home, but it's also a safety feature that allows you to lock and unlock your door. Over time the door handle could start to lose its grip or feel a bit loose. It may also appear worn out and old. This is an indication that it's the time to replace your door handle.
One of the first signs that your door handle needs replacing is if it's becoming difficult to operate. This is a serious issue because you won't be in a position to lock or unlock the door which could put you and your family at risk.
It is also recommended to replace the handle on your door if it is damaged or broken. A broken door handle is dangerous, particularly for children and elderly family members who struggle to open it. They could become trapped. Fortunately, it's fairly simple to fix a damaged door handle by simply replacing the handle that was broken.
Modern door handles are typically standard sizes and will fit any door. If you are not certain if the new door handle you are buying will work, take out the old one and take measurements of its holes in the housing. This will help you buy the correct sized door handle.
It is easiest to remove the old door handle by unscrewing it from the door. This is usually done using the screw driver. Some door handles have an enclosure plate that hides the mounting screws. It is necessary to remove the cover plate to gain access to the screws. Once you have removed the old handle, make an outline of how the spindle is positioned so that you can make sure it is aligned when you put in your new one.
You can also remove the door handle by uncrewing it from the latch mechanism. This is typically done with an screwdriver however you'll need to locate the small latch, which should be at the edge of the trim piece. After removing the latch, unscrew the handle and the strike plate. Then remove the latch from the edge of the door.
Take off the Strike Plate
You'll need to replace your latch plate after replacing the handle. It's the plate that holds the hole through which the latch for the door is inserted when the door is closed. The new handles will come with two latch plates: a rectangular and circular plate (see the above diagram which illustrates the components of the door handle). If you have an old rectangular latch plate, replace it with an oval one. This will let the latch hook onto the strike plate, making the handle easier to use.
The first step is to unscrew the screw that is holding the old latch plate in place. The screws are usually quite tight and require a fair amount of force to loosen them. It may be helpful to get a second person to assist with this task if you can.
After the screws have been removed and the latch plate should pull out of the door with ease. If it is stuck or doesn't move using a nail file to scratch around the edges of the latch plate. This will sometimes free the plate.
Now you can prepare the new strike plate for installation. Attach the latch plate to the door jamb using the screws that came with your new handles. Don't over tighten your screws because this could cause damage to the strike plate.
If you're unsure whether the latch plate is in the correct position, shut and then open the door to determine whether it latches and closes properly. If not then you'll need to adjust the strikeplate up or down, or forward or back until the door shuts properly.
If the door is still moving or jiggles, you may have to expand your latch hole on the strike plate. This is more common for older doors, but can happen due to wear and tear hinge mortises that are too narrow or the wrong size for the latch, or from damaged or broken strike plate that is damaged or broken. If this is the case, follow the exact procedure to adjust the strike plate, but with a metal file instead of an hammer and chisel.
Remove the Latch
The latch is the angled piece of metal that moves through the hole in the inner edge of your door. When you turn the handle, it pushes this latch forward, allowing you to open the door. It also connects to an opening in the frame of the door to keep your door closed. If your door shakes when you close it, changing the latch may be the only thing needed to fix it.
The screws that hold the door latch are hard to spot, but you can usually insert a screwdriver into a small hole on the trim plate, and then pull the latch off. After you've removed your trim plate, it'll be simple to remove the latch and the bolts that keep the latch and spindle in place.
If the latch cannot be easily removed then use a paperclip tool to take it off the handle mechanism. Place the item in the latch's slot that is recessed and gently twist or jiggle it until you feel the latch and handle start to split. It is possible repeat this process a few times before you are able to remove the latch.
It should be possible to slide the new latch into its slot without any issues once you have removed the old one. Use the new screws to secure the latch to the strike plate or door frame. Make sure that it is correctly positioned in the slot, aligned with the screw chambers.
Before you install the new handle, make sure to measure your current backset (the distance from the center of the big hole on the front surface of the door to the edge). You should also check that the size of the latch on the new handle matches the measurement of your existing handle.
You'll require a new lock cylinder if you're replacing the latch and handle or if your current one is damaged. If you're not changing locks the new lock should fit inside the recess you have already installed, and will work with the keys you have already. Pick a latch that has rectangular cover plates to match your old handles.
Then remove upvc replacement door handles can replace your old door handles with a modern design of roses and levers to enhance the appearance of your home. You can purchase complete sets with matching the escutcheons as well as privacy adaptors and escutcheons.
The first step in replacing the door handle inside is to remove the cover plate or rose, which covers the screws and mechanism inside. Use a flathead for removing the cover plate. It may have a slot along one edge or be held in place by pins.
Remove the screw holding the interior handle and set it aside once the cover plate is removed. Take off the screws that hold both the outer and inner plates. You can loosen them using a Philips Screwdriver. Remove the inner plates and latch from the door. Put them away.
Most doors have an opening between the jamb of the door and the edge of the frame, which allows for a handle, however not all have. If yours doesn't then you'll have to make a hole in the door for the new handle. The procedure to do this is similar to the procedure opening a door using a lock, but you'll be taking extra care not to harm the door or frame.
After drilling the holes, you'll need to install new screws for the door knob. Choose the same size as your old screws to prevent getting the handle too tight or loose. Installing a new latch and strike rod is also necessary. These aren't included in most door handle sets.
If you're in search of a reliable replacement for your interior door handle set look no further than the Amazon's Choice FAERSI two-piece chrome-finished handle set. It's a factory-fit product and has been praised with hundreds of five-star reviews. It's a great choice for replacing worn out or damaged door hardware on your Chevy.